-40%

WHITFIELD ADVANTAGE EXHAUST BLOWER MOTOR & GASKET [PP7600] HEAVIER DUTY .9 AMP

$ 72.83

Availability: 41 in stock
  • WARRANTY: 2 Years
  • Model: PP7600
  • Condition: New
  • HVAC Product Type: Exhaust Blower Motor & Gasket
  • Brand: Fasco
  • MPN: 12056010
  • Power Source: 115 VAC

    Description

    Two years warranty for this item can be filed online, if needed.
    GENERAL DESCRIPTION:
    This is a
    HEAVIER DUTY - .9 Amp,
    "Plug & Play" replacement motor kit that is designed specifically for Whitfield Pellet Stoves that use the quick change style blower motors.  It is not an "off the shelf" so called "Universal
    " or "Generic" motor that has different air flow output and typically requires several modifications to get to work with your stove.
    You are getting a top notch motor-blower, not some third rate knock off.
    This motor-blower is Made by FASCO, a company that has various manufacturing locations across the world has been engineering and manufacturing motors and blowers for over 100 years.
    FASCO is the standard by which small motors and blowers are measured.
    T
    his replacement kit com
    es complete so you don't have to mess around with the terminal connections on the lead wire ends
    .  It also comes with a reusable Hi-Temp silicone gasket.  You also don't have to bother with attempting to remove the old fan impeller blade from the old motor, because this comes with a correct new one already mounted and correctly positioned.  Normally when
    y
    ou attempt remove the old fan impeller blade, the rust, corrosion and heat from the exhaust prevent it from coming
    off
    very easily.  I
    f
    you are lucky enough to be able to get it off at all,
    c
    hances are pretty good
    that it will be bent in the process.  If you reuse the
    b
    ent fan impeller blade, it will typically cause vibrations which will significantly shorten the life of the
    motor bearings.
    (* Some older style Whitfield stoves may require a wire adapt
    e
    r.)
    ITEM:
    Exhaust Blower Motor
    New fan Impeller Blade
    6" Mounting Plate w/6 screw holes
    - All pre-assambled
    Replacement Hi Temp Silicone Gasket
    Printed Instructions
    MOTOR SPECS:
    115 Volts - AC
    AMPS - .9
    RPM - 3000
    Wire leads with modular plug in.
    Plugs right into the stove's wiring harness without modifications.
    Ball bearing motor (Doesn't require oil)
    Made by FASCO
    APPLICATION:
    Whitfield (Lennox) Pellet stoves (PN 12056010):
    WHITFIELD -
    ADVANTAGE WP2 - ALL
    (* Some older style Whitfield stoves may require a wire adapt
    e
    r.)
    WHITFIELD -
    ADVANTAGE II-T, II-T CLASSIC, III, PLUS
    WHITFIELD -
    LEGEND WP1 - ALL
    WHITFIELD -
    QUEST WP4 - ALL
    (Has the Oval shaped pellet tube)
    CONDITION:
    Brand New in the original box!
    Made by FASCO. This item is very similar to the OEM part that sells for more $$ and it comes with a reusable hi-temp silicone mounting gasket so you are not bolting metal to metal.
    WARRANTY:
    There is a 2 year warranty on this motor, from the date of purchase.
    USA SHIPPING:
    In order to help hold your costs down, we use economy shipping which can take up to 10 working days (14 calendar days) to arrive.  If you are going to need this item sooner, you will need to choose an upgraded shipping option, which will result in an increase with the shipping costs.
    -->
    ECONOMY -
    .95
    -
    You should get your item within
    3-10 working days
    after it is shipped.
    Shipping by FedEx Ground-SP, UPS or USPS with tracking.
    YOU MUST PROVIDE A PHYSICAL STREET ADDRESS
    .
    If you use a PO Box, include it
    in addition to
    your
    street address.
    NOTE:
    DO NOT
    RELY on the automated delivery time estimates by ebay. We have found them to be highly inaccurate and misleading!
    Average delivery working days for ECONOMY shipping starting the day
    AFTER the item ships
    :
    WESTERN States = 3-5 DAYS
    MID WEST States = 4-7 DAYS
    EASTERN States = 5-10 DAYS
    NEW ENGLAND &
    SE
    States = 7-10.
    If you need your item sooner than the estimates above, you will need to choose one of the Shipping methods below.                 If you need your item sooner than the estimates above, you will need to choose one of the Shipping methods below.                 If you need your item sooner than the estimates above, you will need to choose one of the Shipping methods below.
    --> EXPEDITED -
    .95
    -
    You should get your item within
    2-4 working days
    after it is shipped.  EXPEDITED shipping by USPS Priority.  PO Boxes accepted.
    -->
    E
    XPRESS -
    $
    52
    .00
    -
    You should get your item within
    1-2 weekdays
    after it ships.
    NOT GUARANTEED
    .
    Shipping is by USPS Express with tracking.
    NOTE:  Regardless of what USPS and eBay says, it has been our experience that USPS Express usually takes 1-2 weekdays to deliver,
    NOT COUNTING THE DAY THAT IT SHIPS
    and occasionally longer.  *We do not recommend USPS EXPRESS if you live in rural and/or remote areas or do not have a major city (transportation hub) nearby.  In these cases, we recommend Priority.  In m
    any
    cases, Priority will get it there
    just as fast.  We will not refund
    EXPRESS costs
    if USPS Express doesn't get it to you when you think they should.
    -->
    2nd EXPRESS  -
    .00
    -
    You will get your item
    within
    2 weekdays
    after it ships.
    FedEx 2nd Day
    Guaranteed. Lower 48 only.
    (Order must be received by Noon PST to ship same day. Weather permitting.)
    CANADA SHIPPING:
    .95  - Economy shipping via USPS First Class International with tracking.  Transit time: 7-21 working Days.
    .95  - Expedited shipping via USPS Priority International with tracking.  Transit time: 5-15 working Days.
    Canada buyers are responsible for all duties, fees & taxes imposed by their Government. Please do not ask us to falsify the export documents.
    RETURNS:
    If you need to return the part, you can return it
    UNUSED
    and in the original box/package with all internal contents, within 30 days for a refund. The shipping costs that we incur to get the item to you are not refundable. The part must be in an as received condition and can not have been installed on your stove or any other application.  Once you install the part, it becomes a used part and is not returnable, except under the terms of the manufacturers limited warranty. Restocking fees apply.