-40%
SURECOM 125-520Mhz Digital Power&SWR Meter For Car Radio SW-102 With Two Adaptor
$ 34.84
- Description
- Size Guide
Description
NEW SURECOMSW-102 With SO239-N
PL259-N Adaptor 125-520
Mhz Digital VHF/UHF Power&SWR Meter For
Car Radio
Transceiver
SW102
NOTICE:
T
This Power & SWR Meter is compatible to car radio transceiver, no need another adaptors.
Introduction
VSWR. Forward and reflected power direct digital readout, without any calibration.
Maximum measurable power range up to 120W.
low insertion loss (0.3 decibels or less) structure allows it to be permanently connected.
Build in Frequency counter .
Feature & Specification
Frequency range: 125 - 520MHz
Measurable power range: 0 - 120W
Maximum power: 120W Accuracy: mean + / - 5%
Impedance: 50Ω
Size: W 76 X H 77 X D35 mm.
Weight: <260 grams
Interface: N-J Interface
Adaptor: SO239-N
(SW-102 is not for DMR system)
OLD VERSION : V3.3 ,V3.8 ,V4.5,V4.9 ,V5.0,V5.1
2017-8 : V2.02 ,V2.03
2019 : V2.06
Our version is the newest version V2.06 offered from the factory.
MAX. Power in
120 W
V.S.W.R
1.00~19.9
Frequency Ranger
COVER:100MHz~520MHz
Insertion Loss
< 0.15dB(VHF) , < 0.25dB(UHF)
Temperature
0~60
Battery Build-in
14500 Li-ion
Size
66*68*37 (mm)
Power in
5V (micro usb)
Backlight
AUTO
Interface (in and out )
N(SL16)
Weight
<260g
Connect the Output of your transceiver to "TX" and Antenna or Load to "ANT". Proper adaptor/cable is required if your device has different type of connectors.
Press the red Power button (RED and YELLOW) to power on.
After 2 seconds of LCD self test, its ready for normal measurement.
2 minutes after no power was measured, it will power off automatically.
Press and hol
d the red button for 2 seconds to turn off manually.
Package Contents
1x SURECOM SW-102-UV 125-520MHz Digital VHF/UHF Power & SWR Meter
1x Power PSU 100-240V
1x Charger Cable
1x English Users Manual
2x Connector