-40%
Sulky Solvy Embroidery Stabilizer Water Soluble Light Weight Topping Wash Away
$ 3.16
- Description
- Size Guide
Description
Sulky Solvy Stabilizer Temporary Light Weight Topping Wash AwaySulky Paper Solvy stabilizer is a great way to use designs off your computer or the internet. Print or trace a design onto Paper Solvy and have it wash out once it s stitched. Use as a base, backing or topper. Suitable for use in copy machines, ink-jet printers or bubble-jet printers. It is the PERFECT paper for paper piecing! Paper Solvy does not gum-up needles, is non-toxic and bio-degradable. You can trace designs using pencils, permanent-ink markers or heat transfer designs using Sulky Iron-On Transfer Pens. All Sulky stabilizers are acid and lead free. Make your own, liquid brush-on stabilizer and save money over bottle brands!
Backing or Topping:
Topping
Color Name:
Clear
Hand Weight:
Light
Permanent or Temporary:
Temporary
Removal Method:
Wash-Away
Width:
19.75"
Brand:
Solvy
Helpful Hints
To make a liquid, brush-on stabilizer, save all scraps every time you use your Solvy products (except for Paper Solvy, which has a wood pulp component). Dissolve the equivalent of 1 yd (36 x 20 inches) of the product in 8 oz. of water or enough scraps needed in 8 oz. of water. Brush onto any area you want to stabilize. Allow area to dry completely (this can be sped up with a hair dryer). After stitching, remove by submerging in water for a minute or two until all of the product is dissolved. Store the unused portion of your liquid stabilizer in the refrigerator in a labeled, tightly sealed jar.
Before you use lightweight Solvy (and/or Super Solvy) as a stabilizer under your machine embroideries, be aware that they do not support as many stitches as tear-away or cut-away stabilizers, so carefully consider your design choice.
Because all Sulky Water Soluble Stabilizers are made from non-woven materials they don’t stretch in any direction.
Transfer a pattern to the right side of a fabric by tracing it onto Solvy with a permanent marker and adhering with KK 2000 Temporary Spray Adhesive - then stitch.
If you don’t have any Super Solvy on hand and you want to make Solvy as thick and firm as Super Solvy, two layers of Solvy or Super Solvy can be fused together by applying a warm, dry iron for several seconds (use a press cloth if your iron does not have a non-stick surface.)
Are you wondering...are Sulky water solubles fusible?This area of water solubles is a little confusing. Only Sulky Sticky Fabri-Solvy is sticky (it's not truly fusible, because you don't actually use an iron to fuse it; it comes sticky, with a release sheet on it). Over the years we have "ironed" layers of Solvy or Super Solvy together with a warm, dry, non-stick iron. They only "fuse" to themselves, though. This process will not make them stick to fabric. It just makes them heavier. We did this a lot before we had the very heavy Ultra Solvy in our product line. We often used Sulky KK 2000 to adhere the original product or the now "fused" and heavier product to fabric before we had Sticky Fabri-Solvy. Ultra Solvy (which is 4 times heavier than regular Solvy), can be wiped with a damp sponge and it becomes tacky and you can stick fabric to it. This will not work with the lighter versions of Solvy, though.
We've also made "Liquid Solvy" using scraps from any of the Solvy products (except Paper Solvy which has a wood pulp component). We'd put them in a jar and add water until it was the consistency we wanted, and then apply it with a foam paint brush to fabric, let it dry, and the fabric is very stiff (almost like cardboard), but able to withstand an enormous amount of stitching without puckering. We also use this liquid version to stiffen thread bowls and other artsy thread projects. (There is an actual "recipe" for this liquid Solvy above, but you can make it however thick or thin that you want, and just use your scraps.)
So there are a lot of options with Sulky Solvy products, but fusing them to fabric with an iron is not one of them. Because Sulky KK 2000 Temporary Spray Adhesive is not water soluble, you want to be sure that all of the tackiness of the KK 2000 has dissipated before rinsing the Solvy away. It will dissipate naturally in a few days, or to hasten the process you can press the project with a warm dry iron (using a press cloth). Or tumble in a low temperature dryer for a few minutes. (Heat hastens this dissipation process.)
Favorite Uses
Embroidery (as a topper)
Monogramming
Thread Sketching
Quilting
Appliqué
Transferring a Pattern
Bridging
Buttonholes
3-D Work
Edges
Shadow Work
Cut Work
Heirloom Sewing
Serging