ST CROIX EXHAUST BLOWER FAN MOTOR & GASKET [PP7606] 80P20001-R & 80P30521-R

Description

OEM Style Replacement Exhaust Motor, Impeller & Gasket
Assembly for ST CROIX 80P20001-R  &  80P30521-R
This  is a "Plug & Play" set-up
.  It has three 11" wire leads that exit directly from the motor with the appropriate terminals on them. Included is a new 6" mounting gasket and basic instructions.
This replacement kit comes complete so you don't have to mess around with finding and crimping the wire terminal connections on the lead wire ends.  You also don't have to bother with attempting to remove the old fan impeller blade
(paddle fan)
from the old motor, because this comes with a new one already mounted, correctly positioned and run checked for balance.  Normally when you attempt to remove an old fan impeller blade, the rust, corrosion and heat from the exhaust prevent it from coming off very easily.  If you are lucky enough to be able to get it off at all,
chances are pretty good
that it will get bent or destroyed in the process.  If you reuse a bent fan impeller blade, it will be out of balance and will cause vibrations which will significantly shorten the life expectancy of the motor by prematurely wearing out the bearings.
This replacement blower motor assembly is specifically made as a replacement for the ST CROIX Free standing & Insert models listed below.  It is virtually identical to the original motor, and it is
Made in North America
.
With this "Quick Change" style you will reuse your existing blower housing, so in
most
cases you do NOT need to disconnect the exhaust vent connection.  This replacement usually installs in about half of the time that it takes to replace the complete Blower housing model.  There are 6 screws in the mounting plate to remove-reinstall and 2 or 3 wires to disconnect-reconnect.  Double check your blower and make sure that you have the "Quick Change" style with the 6 removable screws in the mounting plate before ordering.  If you do not, you can still use this but you will need to disassemble your motor from the blower housing and install this new motor back into your blower housing without the mounting plate.  This complete
"Quick Change"
motor has a 1 Year warranty.
ST CROIX uses
a different RPM motor than many other manufacturers and their impeller blade
(paddle fan)
is different from most.
They use a 12 bladed 4-3/4" impeller.
Be aware that there are many so called "Universal" motors being sold here on eBay. They could conceivably bolt up to your ST CROIX, but it is highly likely that the air performance with
them is going to be considerably different, because they use a different RPM & HP motor and a different impeller blade, if they even come with an impeller blade.
ITEM:
"Quick Change" Exhaust Blower Motor Assembly
Ceramic Gasket Replacement
4.75"
Impeller Blade w/backing plate
6" Mounting Plate with 2 sets of mounting holes
All assembled (See pictures)
NOTE: Horizontal
Dimension from mounting plate to the end of the motor is 4"
.
The "Universal" style of motors being sold that are similar to this were designed for other stove makes and not for ST CROIX.  Although they might conceivably bolt up to your stove,
MANY OF THEM ARE LONGER
than this motor
(4"- 4-3/8")
and on some models of ST CROIX could interfere with your ability to close the side panels on the stove.
This blower/motor assembly is manufactured by FASCO and is designed specifically as a ST CROIX replacement. We do not purchase this item from EvenTemp (ST Croix.)
MOTOR SPECS:
115 Volts - AC
AMPS - .8 FLA
RPM -
3000 NL
3-
11" long
Lead wires exiting the motor. White -  Brown -  Black
Made by FASCO in North America
APPLICATION:
ST CROIX
®
Stove Models with 3 wire leads
Afton Bay
Auburn
Greenfield
Hastings
Prescott
York Insert
SCF-050 Furnace
Stove Models with 2 wire leads
(2 wire models are connected by not utilizing the brown wire and leaving it disconnected)
Ashby MF
Ashby Insert
Lincoln SCR
Revolution MF Furnace
May also work on some other Pellet Stove Makes & Models
CONDITION:
Brand New in the original box!
This item is virtually identical to the OEM part that typically sells for more $$ and this one comes with a hi-temp white ceramic mounting gasket.
WARRANTY:
There is a 2 year warranty on this motor, from the date of purchase.
It is up to you to determine if it will work with your application.  Warranty claims can be filed online, if needed.
USA SHIPPING:
In order to help hold your costs down, we use economy shipping which can take up to 10 working days (14 calendar days) to arrive.  If you are going to need this item sooner, you will need to choose an upgraded shipping option, which will result in an increase with the shipping costs.
--> ECONOMY -
FREE
-
You should get your item within
3-10 working days
after it is shipped.
Shipping by FedEx Ground-SP, UPS, or USPS with tracking.
If you use a PO BOX, you must include it along with your physical street address or the package may get returned.
NOTE:  DO NOT RELY on the automated delivery time estimates by ebay. We have found them to be highly inaccurate at times and misleading!
Average delivery working days for ECONOMY shipping starting the day
AFTER the item ships
:
WESTERN States = 3-5 DAYS
MID WEST States = 4-7 DAYS
EASTERN States = 5-10 DAYS
NEW ENGLAND & SE States = 7-10.
If you need your item sooner than this, you will need to choose one of the Shipping methods below.
--> EXPEDITED -
.95
-
You should get your item within
2-4 working days
after it is shipped.
EXPEDITED Shipping by USPS Priority.
PO Boxes accepted
--> E
XPRESS -
.00
-
You should get your item within
1-2 weekdays
after it ships.
NOT GUARANTEED
.
Shipping is by USPS Express with tracking.
NOTE:  Regardless of what USPS and eBay says, it has been our experience that USPS Express usually takes 1-2 weekdays to deliver,
NOT COUNTING THE DAY THAT IT SHIPS
and occasionally longer.  *We do not recommend USPS EXPRESS if you live in rural and/or remote areas or do not have a major city (transportation hub) nearby.  In these cases, we recommend Priority.  In many cases, Priority will get it there just as fast.  We will not refund EXPRESS costs if USPS Express doesn't get it to you when you think they should.
-->
2nd EXPRESS  -
.00
- You will get your item
within
2 weekdays
after it ships.
FedEx 2nd Day
Guaranteed.
(Order must be received by Noon PST to ship same day. Weather permitting.)
CANADA SHIPPING:
.95  - Economy shipping via USPS First Class International with tracking.  Transit time: 7-21 working Days.
.95  - Expedited shipping via USPS Priority International with tracking.  Transit time: 5-15 working Days.
Canada buyers are responsible for all duties, fees & taxes imposed by their Government. Please do not ask us to falsify the export documents.
RETURNS:
If you need to return the part, you can return it UNUSED, within 30 days for a refund. The shipping costs that we incur to get the item to you are not refundable. The part must be in an as received condition and can not have been installed on your stove or any other application. The part must be in the original box-package with all internal contents intact. Once you install the part, it becomes a used part and is not returnable, except under the terms of the manufacturers limited warranty. Restocking fees apply.