-40%
SpectrumForce Desk Mount For Three Base Scanners, SDS200, BCD536HP, *w/ EXTRAS*
SpectrumForce Desk Mount For Three Base Scanners, SDS200, BCD536HP, *w/ EXTRAS*
SpectrumForce Desk Mount For Three Base Scanners, SDS200, BCD536HP, *w/ EXTRAS*
SpectrumForce Desk Mount For Three Base Scanners, SDS200, BCD536HP, *w/ EXTRAS*
SpectrumForce Desk Mount For Three Base Scanners, SDS200, BCD536HP, *w/ EXTRAS*
SpectrumForce Desk Mount For Three Base Scanners, SDS200, BCD536HP, *w/ EXTRAS*
SpectrumForce Desk Mount For Three Base Scanners, SDS200, BCD536HP, *w/ EXTRAS*
SpectrumForce Desk Mount For Three Base Scanners, SDS200, BCD536HP, *w/ EXTRAS*
SpectrumForce Desk Mount For Three Base Scanners, SDS200, BCD536HP, *w/ EXTRAS*

SpectrumForce Desk Mount For Three Base Scanners, SDS200, BCD536HP, *w/ EXTRAS*

$ 34.32

Availability: 41 in stock
  • All returns accepted: ReturnsNotAccepted
  • Model: 3 Scanner Desk Mount
  • Type: Desktop
  • Condition: Good condition. Extra holes were drilled for SDS200 (see pictures)
  • Brand: SpectrumForce

    Description

    Used
    SpectrumForce Desk Mount
    for Three Base Uniden Scanners
    . Extra holes were drilled to accommodate an SDS200. Also included is a
    4 Scanner Power Supply AC Adapter
    (there is electrical tape on one of the adapters from wire getting snagged but doest affect function)
    , 3 way antenna splitter, extra BNC cable and BNC adapte
    rs.
    Scanners NOT included.
    Shipping price is included in auction price and will show as FREE UPS shipping, USA Only.
    3-scanner Desk Mount
    , built with strong sheet-metal, allows you to attractively mount and display between one and three base or base/mobile scanners that are approximately 7 to 7.5" wide. You can mount any combination of the following Uniden Bearcat Scanners:
    BCD996P2,BCD536HP,SDS200, 760, 780, 785, 796, BCT15, BCD996T; GRE PSR400 and PSR600; and a variety of Radio Shack models including the 2053 and 2096 and similar models.
    You can also drill holes in the bottom flanges to secure the mounting bracket to a desk or table but the radio weight keeps the unit from sliding in general. You can tilt the radios slightly upward for easy of operation if you desire. The front of the radios protrude approximately 1/2" from the edge of the metal providing a very strong and again, professional, appearance. Simply use the mobile mounting knobs (or bolts can easily be found at a local hardware store) to secure the scanners in place. These brackets are being used at news media assignment desks nationally as well as by hobbyists as a clean and attractive way to present and operate the radios. The brackets have been black-powder-coated to add to the professional look. The mount fits radios of 7.5" perfectly such as the DIN-E radios: The BCT15, BCD996T, PRO-2096, PSR400 and PSR600. But earlier scanners that are 7" wide will require the addition of a few washers or a nut. A two-high version is also available.
    The dimensions are as follows: 7.5" wide (inside) by 6 1/8" deep by 9 1/8" high; the flange at the bottom is 1" wide.
    4-Scanner Power Supply Adapter
    powers 4 desktop scanners from a single wall outlet. This is an ideal addition to the Spectrum Force Desktop Mounts! It provides 13.8VDC at 2.5 amps, enough to safely power up to 4 scanners or accessories like the Stridsberg multicoupler.
    This adapter works on most Uniden desktop/mobile scanners, including:
    SDS200
    BCD536HP
    BCD996T/XT/P2
    BCT15, 15X
    BC785D
    BC796D
    BC780XLT
    BC340CRS
    BC370CRS
    RH-96 Remote Head