QUADRAFIRE PELLET [PP7620] EXHAUST BLOWER MOTOR & GASKET # 812-4400

Description

Quadrafire uses
a LOWER RPM motor than most other manufacturers and their impeller (fan) blade is also different.  They use a 9 blade, 4-7/16" Deep impeller, which is much different than the larger 12 blade, 4-3/4" impellers used on many other stoves.
Be aware that there are many so called "Universal" motors being sold here on eBay and they can probably bolt up to your Quadrafire, but it is also very probable that your air performance-volume with
them is going to be considerably different because they use a higher RPM motor and a larger diameter 12 blade, "Shallow" impeller blade.  This motor-blower is also much quieter than the higher RPM "Generic" motor Kits.
This motor was designed specifically as a Quadrafire replacement part.  It has matched RPM and air performance-volume with the OEM motor-blower for Quadrafire pellet stoves.  It is virtually identical to the currently available OEM replacement part, except it comes without the blower housing so in most cases is easier to swap out.  It is a "Plug & Play" set-up and comes with the correct size and length of wires and terminations, so you don't have to mess around with cutting wires and crimping ends on them.  It comes with the external cooling fan (umbrella fan) for the motor, a new mounting gasket and basic instructions.  This replacement blower motor assembly is specifically made to replace the Quadrafire models listed below.  It is virtually identical to the original motor, except it is made by Fasco.
With this "Quick Change" style you will reuse your existing blower housing, so in many cases you do NOT need to disconnect the exhaust vent connection.  (Check existing clearances for removing motor).  If you do not need to disconnect your exhaust vent,  this replacement can install in about half of the time that it takes to replace the complete Blower housing model.  There are 6 screws in the mounting plate to remove-reinstall and 2 wires to disconnect-reconnect.
ITEM:
"Quick Change" Exhaust Blower Motor Assembly
Reusable Hi Temp Silicone Gasket
Impeller Blade  4.4"
6" Mounting Plate with 2 sets of mounting holes
All assembled
(See pictures)
NOTE:
Dimension from mounting plate to the rear of the external motor cooling fan blade is 3-7/16"
.
The "Universal" style of motors being sold that are similar to this were designed for other stove makes.  Although they could bolt up satisfactorily,
THEY ARE typically LONGER
(4" - 4-3/8") than this motor and on some models of Quadrafire could interfere with your ability to close the side panels on the stove.
This blower/motor is designed specifically as a Quadrafire replacement.
Replacement Motor, Impeller & gasket replacement for Quadrafire 812-4400 blower
MOTOR SPECS:
115 Volts - AC
AMPS - 1.0
RPM -
2900
2- Male Spade terminal leads exiting the motor wires.
1- Ground wire on motor
Ball bearing motor (Doesn't require oil)
Made by FASCO
5/16" dia. stainless steel shaft
APPLICATION:
Quadrafire
®
Contour
Castile
Sante Fe
Sante Fe B
This motor is different than the replacement for the For 1200 Classic Bay models.
For Classic Bay - 1200 models, see this ebay item:
161179927902
Will also work on some other Pellet Stove Makes & Models
CONDITION:
Brand New in the original box!
This item is virtually identical to the OEM part that sells for more $$ and this one comes with a hi-temp white  mounting gasket.
WARRANTY:
There
is a 1 year warranty on this motor, from the date of purchase.
Warranty can be filed online if needed.
USA SHIPPING:
In order to help hold your costs down, we use economy shipping which can take up to 10 working days (14 calendar days) to arrive.  If you are going to need this item sooner, you will need to choose an upgraded shipping option, which will result in an increase with the shipping costs.
-->
ECONOMY -
FREE
-
You should get your item within
3-10 working days
after it is shipped.
Shipping by FedEx Ground-SP or USPS Parcel Select with tracking.
YOU MUST PROVIDE A PHYSICAL STREET ADDRESS
.
If you use a PO Box, include it
in addition to
your
street address.
NOTE:  DO NOT RELY on the automated delivery time estimates by ebay. We have found them to be highly inaccurate and misleading!
Average delivery working days for ECONOMY shipping starting the day
AFTER the item ships
:
WESTERN States = 3-4 DAYS
MID WEST States = 4-7 DAYS
EASTERN States = 5-10 DAYS
NEW ENGLAND &
SE
States = 7-10.
If you need your item sooner than this, you will need to choose one of the Shipping methods below.
-->
EXPEDITED -
.95
-
You should get your item within
2-4 working days
after it is shipped.
EXPEDITED Shipping by USPS Priority.
PO Boxes accepted
--> E
XPRESS -
.00
-
You should get your item within
1-2 weekdays
after it ships.
NOT GUARANTEED
.
Shipping is by USPS Express with tracking.
NOTE:  Regardless of what USPS and eBay says, it has been our experience that USPS Express usually takes 1-2 weekdays to deliver,
NOT COUNTING THE DAY THAT IT SHIPS
and occasionally longer.  *We do not recommend USPS EXPRESS if you live in rural and/or remote areas or do not have a major city (transportation hub) nearby.  In these cases, we recommend Priority.  In many cases, Priority will get it there just as fast.  We will not refund EXPRESS costs if USPS Express doesn't get it to you when you think they should.
-->
2nd EXPRESS  -
.00
-
You will get your item
within
2 weekdays
after it ships.
FedEx 2nd Day
Guaranteed.  (Order must be received by Noon PST to ship same day. Weather permitting.)
CANADA SHIPPING:
.95  - Economy shipping via USPS First Class International with tracking.  Transit time: 7-21 working Days.
.95  - Expedited shipping via USPS Priority International with tracking.  Transit time: 5-15 working Days.
Canada buyers are responsible for all duties, fees & taxes imposed by their Government. Please do not ask us to falsify the export documents.
RETURNS:
If you need to return the part, you can return it
UNUSED
and in the original box with all internal contents, within 30 days for a refund. The shipping costs that we incur to get the item to you are not refundable. The part must be in an as received condition and can not have been installed on your stove or any other application.  Once you install the part, it becomes a used part and is not returnable, except under the terms of the manufacturers limited warranty. Restocking fees apply.
Any names used in this advertising are ascribed to their respective owners and acknowledged.  Application information is provided as a courtesy.  Accuracy is not guaranteed.
T
h
e use of a manufacturers part number is for reference only.  Unless indicated otherwise, parts are not OEM.
igniter, ignitor, winfield, advantage, profile, optima, advantage plus, quest, quest plus, traditions, t300p, t-300p, t-300-p, montage, quad, quadrafire, austroflamm, breckwell, harman, harmon, us stove, united states stove, englander, englands, heating element,