Naturela wood pellet burner controller, central heating, boiler, DIY

Description

1 brand new wood burner controller.
The controller NPBC-V3C works with NPBC-V3M Executive module and NRC-6 – new, elegant and smart Control module with 2.4'' TFT color display.
With its 32 bit CPU and completely new software, this controller is better in many aspects than any previous models. Here are some of its advantages:
Clearer and intuitive control interface with modern design of the menus.
The Control module can be equipped with a WiFi module NRM-W3 for connection with the Naturela remote monitoring and control system through the web
4 preset fuel profiles make switching between different fuels easier than ever
Additional messages warn about incorrect parameter input or if parameters from a different menu require corrections after the current changes.
Statistical information about the fuel consumption divided by hour and based on a calibrating constant parameter for the fuel auger capacity
More parameters about the burner's work and current state displayed on the main screen at the same time
A micro USB coupling on the face panel of the Control module for connection with a computer with software for direct control and monitoring.
Mechanisms and sensors connected to NPBC-V3C-1
Electric feed screw motor to transfer the fuel from the bunker to the burner (power up to 180W)
Electric internal auger motor to forward the fuel to the burning chamber (power up to 180W)
Main fan with smooth speed control to regulate the air flow to the burning chamber (power up to 180W)
Additional cleaning fan (power up to 900W)
Exhaust gases fan with smooth speed control (power up to 180W)
Heating element to fire the pellets (power up to 800W)
Hot water heater circulation pump (power up to 180W)
Central heating installation circulation pump (до 180W)
Photo sensor to detect the burning fire
Temperature sensor or thermostat to control the back burning
Temperature sensor to control the temperature of the water in the boiler
Temperature sensor for the temperature of the hot water heater
High temperature sensor pt100 for the temperature of the exhaust gases (Optional)
A potential free socket of a room thermostat for better control of the burning process according to the room temperature.
A potential free socket for an external stop switch
Micro USB interface for connection with a computer
And more:
NPBC-V3C controllers can be equipped with additional Control module NRC-6-SV working as a room thermostat.
All parameters important for the burning process control can be adjusted which makes NPBC-V3C adaptable to almost any pellet burner or boiler
Increased carrying capacity of the outputs up to 16A
An optional analog output (0-10 V) can control a frequency inverter for powerful three-phase fan.
The universal power supply allows the controller to be used both in 110V/60Hz and in 220V/50Hz grids.
NPBC-V3C controllers come in several different versions:
NPBC-V3C-1 - pellet boiler controller detecting the burning fire by photo sensor and with temperature control up to 85°C (99°C)
NPBC-V3C-2 - water jacket pellet stove controller detecting the burning fire by measuring the temperature of the exhaust gases and with temperature control up to 85°C
NPBC-V3C-B - pellet oven controller detecting the burning fire by photo sensor and with temperature control up to 300°C
NPBC-V3C-K - dry pellet stove controller detecting the burning fire by measuring the temperature of the exhaust gases
Supported languages are English, Spanish, Portuguese, Russian and more
NOT MADE IN CHINA
We accept PayPal only.