For Fein Multimaster BOSCH Dremel Makita 48 Pcs Oscillating Multi Tool Saw Blade

Description

Specification:
Bi-Metal Oscillating Saw Blade:
The Bi-Metal blade is ideal for demolition, plumbing, remodeling and general wood and soft-metal cutting. The blade features an off-set to allow for flush cuts. The Bi-Metal oscillating saw blade cuts nail embedded wood (6d-8d finishing nails), fiberglass, tubing, PVC, and soft metals like lite gauge copper, lite gauge metal mesh, and light gauge sheet metal and other soft metallic and non-metallic materials. The blades are great for Flush and Plunge cuts and are designed with laser welded high speed steel cutting edge and flexible alloy steel back to resist breaking, further extending blade life.
Wood/Soft-Metal Oscillating Saw Blade:
For Fein Multimaster BOSCH Dremel Makita 48 Pcs Oscillating Multi Tool Saw Blade
Specification:
Bi-Metal Oscillating Saw Blade:
The Bi-Metal blade is ideal for demolition, plumbing, remodeling and general wood and soft-metal cutting. The blade features an off-set to allow for flush cuts. The Bi-Metal oscillating saw blade cuts nail embedded wood (6d-8d finishing nails), fiberglass, tubing, PVC, and soft metals like lite gauge copper, lite gauge metal mesh, and light gauge sheet metal and other soft metallic and non-metallic materials. The blades are great for Flush and Plunge cuts and are designed with laser welded high speed steel cutting edge and flexible alloy steel back to resist breaking, further extending blade life.
Wood/Soft-Metal Oscillating Saw Blade:
Ideal for flush cuts and cut-outs in hard materials and non-ferrous metals (light gague; low iron content) and materials such as hardwoods, plywood and particle board this blade can also tackle materials such as plastics, fiberglass and Plexiglas. Manufactured with a durable cutting edge that resists wear and cuts quickly. Designed to saw into corners and cut angles with precision the blade can be utilized for even the toughest tasks. The design allows the blade to be used in multiple projects, trimming base boards and door jambs when installing new flooring is easy with thisBlade universal cutting blade.
Precision Tooth Oscillating Saw Blade:
Ideal for flush cuts and cut-outs for switches, outlets, hardwood floors, base boards, trim and molding. The tooth blade will saw into corners and cut angles with precision. With sharp teeth, the precision blade cuts through laminated material without chipping and the large tooth design resists loading and improves cutting speeds. Use this blade for plunge cutting drywall for countless tasks such as installation of recessed lighting and ceiling fans.
User Tips:
1. When flush cutting it is important not to force the tool during the plunge cut.
2. Strong tool vibration indicates you are applying too much pressure.
3. To protect a delicate surface while using a flush cut blade, use tape or cardboard to cover it before cutting.
Fitment note: Not compatible with Bosch MX30, MM40/MM45.
Fitment note: Not compatible or Bosch Quick Release tools.
Fitment note: Adapter required for Rockwell and Worx (except Hyperlock).
Fitment note: Adapter required for Fein Supercut.
Package List:
12 Pack - 1-3/8-Inch Wood/Plastic/Soft-Metal Saw Blades
12 Pack - 1-3/8-Inch Precision Japan Tooth Saw Blades
12 Pack - 1-3/4-Inch Wood/Plastic/Soft-Metal Saw Blades
12 Pack - 1-3/4-Inch Precision Japan Tooth Saw Blades
Package Include:
48 × Saw Blades
Note:
1.Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Compatible List
AEG Multi-Tool
Back And Decker *
Batavia Multi-Tool
Blue Hawk
Bosch
Chicago
Cibtek
Clarke CMFT250
CMT
Craftsman Nextrec
Craftsman Bolt-on *
Dewalt *
Dremel (Except quick release)
Einhell
Fein Multimaster
Ferm Zwolle Holland
Genesis Multi-Purpose
Haakon Multi Function
Hardin AZ318-2 250W
Haussmann 5-in-1 Multi-tool
IIT Multi-Function
Kawasaki
King Canada
Klutch
Kwiktool USA
LongActive
Makita Multi-Tool
Mastercraft
Master Mechanic
MasterForce
Matrix
Meec Tools
MasterForce Utila-Tool
Milwaukee
Makita Multi-Tool
Norge Multi-Tool
Ozito
Performax
Pit Bull
Porter Cable *
Power Craft
Power Duro
Pro-Line
Project Pro
Renovator
Rigid Jobmax
Ryobi JobPlus
Samona (Rok) Multi-Tool
Secco
Skill Multi-Tool
Stanley FatMax *
Terratek TPMT
Taurus Multi Function
TradeMaster
Trades Pro Multi Tool
Task Force
Tool Shop
TopCraft
Voss
Wen Multi-Tool
Westfalia
Wolf Oscillating Multi Tool
Work Best
X2 Hyperlock
* Compatable Quick Release (no adapter need)
Payment
1.We currently only accept payment through PayPal.
2.Payment must be made within a few days after the auction/bid ends, or eBay will open Unpaid Item case automatically .
Returns
Make sure items fit your vehicle. For Part & Accessories items please verify the Part Number and Size carefully. And make sure the item will fit your vehicle.
If you are not sure whether it will fit or not please contact us via eBay Message before buying.
If you received an item which is NOT fit for your vehicle please contact us .
Delivery details
Items will be shipped to your eBay address within one business day when we receive full payment.
We ship to the worldwide with USPS or Fedex . Our warehouse is located in California .
Terms of sales
1. We leave Postive feedback to all our customers. If you satisfy with your item ,please leave us a postive feedback ,we are very appreciated .
If for any reason you are not satisfied with the purchase, Please Do Not Leave Negative Feedback Before Contacting us .We will work hard to make it right and make you satisfied .
2. Return
If the item arrives to you in a non-working condition or "not as described"，please contact us through ebay's "Contact Seller" message system .
Contact Us
CONTACT US via eBay Messages.
Any Question please contact us via eBay Messages.
Customer service will respond to you within 24 hours.
Thank you for your business!
Carburetor
Search Store
Top Seller
Shop Category
Store Home
Suspension & Steering
Lighting & Lamps
◈  Fog Lights
◈  Tail Lights
◈  Xenon Headlight Ballast
◈  Headlight
◈  Fog Lamps cover
◈  Turn Lights
◈  Brake Lights
◈  Truck Light Strip
◈  Moto Lighting & Lamps
◈  Others
Carburetor
◈  Lawn Mowers Carburetor
◈  String Trimmers Carburetor
◈  Blower Carburetor
◈  Snow Blower Carburetor
◈  Saw Carburetor
◈  Tractor Carburetor
◈  Motorcycle Carburetor
◈  ATV Carburetor
◈  Automobile Carburetor
◈  Others
◈  rebuild kit
◈  gasket
◈  Intake Manifold Boot
◈  Golf Carburetor
Boat
◈  Steering Shaft Pin
◈  Yacht Light
◈  Others
Auto Valve
◈  Pressure Relief Valve
◈  Air Idle Valve
◈  Transmission Solenoids
◈  Control Valve
◈  Valve Body
◈  EGR Valve
◈  Selector Valve
◈  Others
Motorcycle Valve
◈  Motorcycle Solenoid Valve
◈  Motorcycle fuel Switch Valve
◈  Others
Module
◈  Headlight Driver Module
◈  Control Circuit Board
◈  Fan Control Module
◈  Voltage Converter Module
◈  Others
Fule Injector
Brakes & Brake Parts
◈  Brake Master Cylinder
◈  Clutch & Clutch Parts
◈  Motorcycle Hand Brake Handle
◈  Motorcycle Brake Cable
◈  Motorcycle Brake Pads
◈  Others
Car Repair Kit
Auto Engine System
◈  Valve Cover & Gasket
◈  Oil Cooler
◈  Engine Timing Cover
◈  Turbine Cover
◈  Machine Oil Can
◈  Filter Housing &Accessories
◈  Oil Scale
◈  Others
Auto Ignition System
◈  Spark Plug
◈  Car Ignition Coil
◈  Spark Plug Protective Cover
◈  Ignition Switch
◈  Car Ignition Module
◈  Others
Auto Hub
◈  Locking Hub
◈  Hub Bearing
◈  Wheel Spacers Adapters
◈  Others
Motorcycle Ignition System
◈  Motorcycle Ignition
◈  Motorcycle Ignition Coil
◈  Motorcycle Fuel Switch
◈  Motorcycle Hand Plate
◈  Motorcycle Ignition Switch
◈  Motorcycle Starter Fitting
◈  Motor Electromagnetic Starter
Motorcycle engine system
◈  Piston Cylinder Fittings
◈  Camshaft
◈  Others
Auto Actuator
◈  Air Conditioner Actuator
◈  Door Lock Actuator
◈  Hood Catch
◈  Clutch Actuator
◈  Fuel Door Opener Actuator
◈  Others
Auto Motor
◈  Transmission stepper motor
◈  Transfer Case Gear Motor
◈  Blower Motor
◈  Blower Resistor
◈  Others
Auto Inlet & Outlet System
◈  Air Filter
◈  Intake Exhaust Valves
◈  Throttle Body
◈  Power Brake Booster
◈  Exhaust And Intake Pipes
◈  Turbocharger
◈  Others
Auto Circuit Wiring Harness
◈  Airbag Hairspring
◈  Positive Battery Cable
◈  Sensor Harness
◈  Body Wiring Harness
◈  Gear Shift Control Cable
◈  Battery Terminal
◈  Others
Transmission System
◈  Chain
◈  Shaft
◈  Gear
◈  Tensioner
◈  Belt
◈  Others
Auto Switch
◈  Door Power Window Switch
◈  Neutral Safety Switch
◈  Combination Lever Switch
◈  Parking Brake Switch
◈  Others
Motorcycle Control System
◈  Gearbox Shift Line
◈  Rectifier
◈  Relay
◈  Voltage Regulator
◈  Thumb Oiler
◈  Others
Auto Sensor
◈  TPMS Sensor
◈  Mass Air Flow Sensor
◈  Oxygen Sensor
◈  Knock (Detonation) Sensor
◈  Air Pressure Sensor
◈  Throttle Position Sensor (TPS)
◈  Vehicle Speed Sensor
◈  ABS Wheel Speed Sensor
◈  Fuel Pressure Sensor
◈  Crankshaft Position Sensor
◈  Oil Pressure Sensor
◈  Camshaft Position Sensor
◈  MAP Sensor
◈  Exhaust Pressure Sensor
◈  Coolant Temperature Sensor
◈  Others
Motorcycle Pump
◈  Fuel Pump
◈  Brake Calipers
◈  Others
Auto Interior
◈  Plastic Rivets Fasteners
◈  Trunk Shield
◈  Sunroof Sunshade Corn
◈  Armrest Center Box Cover
◈  Cup Holder
◈  Inside Door Handle
◈  Inner Door Panel Handle
◈  Cigarette Lighter
◈  Storage Box
◈  Air Conditioner Vent
◈  Others
◈  Seat Covers
◈  Floor Mats
Exterior Trimming Parts
◈  Roof Rack
◈  Running Boards/Side Steps
◈  Bmuper Grille
◈  Fender Flares
◈  Door Handle
◈  Fuel tank cap
◈  Hinge
◈  Front Bumper
◈  Rear Bumper
◈  Motorcycle Decoration
◈  Others
◈  Window Visors
◈  Windshield Wiper Blades
◈  Front bumper trim
◈   Auto body trim panel
Auto Pump
◈  Fuel Pump
◈  Water Pump
◈  Air Pump
◈  Power Steering Pump
◈  Clutch Master Cylinder
◈  Oil Pump
◈  Others
Business & Industrial
▷  Industrial Control Module
♢  Control Valves
♢  other
◈  Others
▷  CNC
♢  Edge finder
♢  Drill Bits
♢  Spring Collet
♢  Boring Bar
♢  Mandrel
♢  Collet Chuck
♢  Pull Stud
♢  Quick Change Tool Post
♢  Drill Chuck
♢  Drill Chuck Arbors
♢  Live center
♢  Vise
♢  Milling Arbor
♢  Reamer
♢  Blocks
♢  Other
▷  Hand Tools
♢  Rivet Gun
♢  Wrenches
♢  Hydraulic Crimper
♢  Balance Level
♢  Drill Bits
♢  Outside Micrometer
♢  Casters
♢  Other
▷  Metalworking Supplies
♢  Sanding Disc
♢  Metal Cut Off Wheels
♢  Flap Discs
♢  Hose Clamp
♢  Welding Wire
♢  Cable
♢  Piston Driver
♢  Other
▷  Generator Accessories
♢  Automatic Voltage Regulator
♢  Generator Carburetor
♢  Other
Home & Garden
◈  Sports Goods
▷  Yard, Garden & Outdoor Living
♢  Lawn mower parts
◈  Toy
◈  Others
Radiators & Parts
Car tools
ATV&UTV Parts
◈  ATV&UTV Suspension System
◈  ATV&UTV Brake System
◈  ATV&UTV Pump
◈  ATV&UTV Carburetor Parts
◈  ATV&UTV Lighting System
◈  ATV&UTV Body&Frame
Motorcycle Parts
Special Vehicles ＆ Boats
Other
Hot Item
Carburetor Carb For Craftsman LT1000 LT2000 DLS3500 16HP 18HP 20HP Engine Parts
USD 17.00
Fuel Pump Fit For Caterpillar Backhoe Cat 414E 416E 420D 420E 422E 424D 252B US
USD 28.09
Carburetor Repower Maintenance Kit For ECHO GT-225 PE225 SRM225 For ZAMA RB-K93
USD 14.63
Carburetor For Briggs Stratton 698445 791888 793224 792358 794572 697141 697190
USD 17.01
Carburetor Set for Briggs & Stratton V-Twin 20HP 21HP 22HP 23HP 24HP 25HP 699709
USD 29.05
For Fein Multimaster BOSCH Dremel Makita 48 Pcs Oscillating Multi Tool Saw Blade
Specification:
Bi-Metal Oscillating Saw Blade:
The Bi-Metal blade is ideal for demolition, plumbing, remodeling and general wood and soft-metal cutting. The blade features an off-set to allow for flush cuts. The Bi-Metal oscillating saw blade cuts nail embedded wood (6d-8d finishing nails), fiberglass, tubing, PVC, and soft metals like lite gauge copper, lite gauge metal mesh, and light gauge sheet metal and other soft metallic and non-metallic materials. The blades are great for Flush and Plunge cuts and are designed with laser welded high speed steel cutting edge and flexible alloy steel back to resist breaking, further extending blade life.
Wood/Soft-Metal Oscillating Saw Blade:
Ideal for flush cuts and cut-outs in hard materials and non-ferrous metals (light gague; low iron content) and materials such as hardwoods, plywood and particle board this blade can also tackle materials such as plastics, fiberglass and Plexiglas. Manufactured with a durable cutting edge that resists wear and cuts quickly. Designed to saw into corners and cut angles with precision the blade can be utilized for even the toughest tasks. The design allows the blade to be used in multiple projects, trimming base boards and door jambs when installing new flooring is easy with thisBlade universal cutting blade.
Precision Tooth Oscillating Saw Blade:
Ideal for flush cuts and cut-outs for switches, outlets, hardwood floors, base boards, trim and molding. The tooth blade will saw into corners and cut angles with precision. With sharp teeth, the precision blade cuts through laminated material without chipping and the large tooth design resists loading and improves cutting speeds. Use this blade for plunge cutting drywall for countless tasks such as installation of recessed lighting and ceiling fans.
User Tips:
1. When flush cutting it is important not to force the tool during the plunge cut.
2. Strong tool vibration indicates you are applying too much pressure.
3. To protect a delicate surface while using a flush cut blade, use tape or cardboard to cover it before cutting.
Fitment note: Not compatible with Bosch MX30, MM40/MM45.
Fitment note: Not compatible or Bosch Quick Release tools.
Fitment note: Adapter required for Rockwell and Worx (except Hyperlock).
Fitment note: Adapter required for Fein Supercut.
Package List:
12 Pack - 1-3/8-Inch Wood/Plastic/Soft-Metal Saw Blades
12 Pack - 1-3/8-Inch Precision Japan Tooth Saw Blades
12 Pack - 1-3/4-Inch Wood/Plastic/Soft-Metal Saw Blades
12 Pack - 1-3/4-Inch Precision Japan Tooth Saw Blades
Package Include:
48 × Saw Blades
Note:
1.Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Compatible List
AEG Multi-Tool
Back And Decker *
Batavia Multi-Tool
Blue Hawk
Bosch
Chicago
Cibtek
Clarke CMFT250
CMT
Craftsman Nextrec
Craftsman Bolt-on *
Dewalt *
Dremel (Except quick release)
Einhell
Fein Multimaster
Ferm Zwolle Holland
Genesis Multi-Purpose
Haakon Multi Function
Hardin AZ318-2 250W
Haussmann 5-in-1 Multi-tool
IIT Multi-Function
Kawasaki
King Canada
Klutch
Kwiktool USA
LongActive
Makita Multi-Tool
Mastercraft
Master Mechanic
MasterForce
Matrix
Meec Tools
MasterForce Utila-Tool
Milwaukee
Makita Multi-Tool
Norge Multi-Tool
Ozito
Performax
Pit Bull
Porter Cable *
Power Craft
Power Duro
Pro-Line
Project Pro
Renovator
Rigid Jobmax
Ryobi JobPlus
Samona (Rok) Multi-Tool
Secco
Skill Multi-Tool
Stanley FatMax *
Terratek TPMT
Taurus Multi Function
TradeMaster
Trades Pro Multi Tool
Task Force
Tool Shop
TopCraft
Voss
Wen Multi-Tool
Westfalia
Wolf Oscillating Multi Tool
Work Best
X2 Hyperlock
* Compatable Quick Release (no adapter need)
Payment
Returns
Delivery details
Terms of sales
Contact Us
1.We currently only accept payment through PayPal.
2.Payment must be made within a few days after the auction/bid ends, or eBay will open Unpaid Item case automatically .
Make sure items fit your vehicle. For Part & Accessories items please verify the Part Number and Size carefully. And make sure the item will fit your vehicle.
If you are not sure whether it will fit or not please contact us via eBay Message before buying.
If you received an item which is NOT fit for your vehicle please contact us .
Items will be shipped to your eBay address within one business day when we receive full payment.
We ship to the worldwide with USPS or Fedex . Our warehouse is located in California .
1. We leave Postive feedback to all our customers. If you satisfy with your item ,please leave us a postive feedback ,we are very appreciated .
If for any reason you are not satisfied with the purchase, Please Do Not Leave Negative Feedback Before Contacting us .We will work hard to make it right and make you satisfied .
2. Return
If the item arrives to you in a non-working condition or "not as described"，please contact us through ebay's "Contact Seller" message system .
CONTACT US via eBay Messages.
Any Question please contact us via eBay Messages.
Customer service will respond to you within 24 hours.
Thank you for your business!
All rights reserved.