AR8000 8 Channel Receiver For Spektrum DX7s DX8 DSMX Transmitter Set

Description

AR8000 8 Channel Receiver For Spektrum DX7s DX8 DSMX Transmitter Set
Specification:
Brand new
Type: AR8000 Receiver
Length: Approx. 34.3mm/1.35 inch
Width: Approx. 32.3mm/1.27 inch
Height: Approx. 11.4mm/0.45 inch
Channels: 8
Modulation: DSM2DSMX
Band: 2.4GHz
Voltage Range: 3.5–9.6
The frequency method:
Step 1. Insert the frequency plug into the receiver BIND channel, the battery (or turn on the power supply) into any other unused channel, then the internal receiver and external receiver LED lights flashing state.
Step 2. Transmitter set the status of each channel (for the protection of the state when out of control, in general, the lowest throttle), hold down the remote control on the code key (lights), and open the transmitter power, (preset all-channel protection Set here)
Step 3. At this point the internal receiver LED lights from fast flash to slow flash, within a few seconds the receiver and external receiver LED lights to light, LED light is always on when the frequency to complete
Step 4. Remove the BIND interface on the code line, re-power the normal operation of the channel.
Package Included:
1 * AR8000 Receiver
Note:
The new receiver only need to frequency once, after the success of the frequency, use the frequency line to remove
Please allow minor deviation due to manual measurement.
Due to the difference between different monitors, the picture may not reflect the actual color of the item.
If you  have any question,Please feel free to contact us
On Aug-16-21 at 18:56:05 PDT, seller added the following information: