2.8 inch LCD NanoVNA VNA HF VHF UHF UV Vector Network Analyzer Antenna Analyzer

Description

Store Categories
Store Categories
Other
NanoVNA VNA HF VHF UHF UV Vector Network Analyzer Antenna Analyzer+LCD+Battery
Product View
Detail
Description:
* Simple and practical PC control software, you can export Touchstone (snp) files for various radio design and simulation software through PC software. The improved frequency algorithm can use the odd harmonic extension of si5351 to support the easurement frequency up to 900MHz. The metal shield is designed to reduce the external interference and improve the measurement accuracy. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic. The extended 300M-600MHz band provides better than 50dB of dynamics, and the 600M-900M band is better than 40dB of dynamics.
* This is a DIY product that provides perfect vector network measurement capabilities in the size of a credit card. It includes a 2.8-inch touch screen and 400mAh battery, which can be used offline for 2 hours. For longer measurement, please connect external power supply or contact me to make a larger battery version. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring..
Specification:
- Condition: 100% brand new high quality
- Product Name: Vector Network Analyzer
- Color: As picture shown
- Measurement frequency: 50KHz ~ 300MHz (50KHz -900MHz, enable extended firmware)
- RF output: -13dbm (maximum -9dbm)
- Frequency accuracy: <0.5ppm
- Measurement range: 70dB (50kHz-300MHz), 50dB (300M-600MHz), 40dB (600M-900MHz) enable extended firmware)
- Port SWR: < 1.1
- Display: 2.8 inch TFT (320 x240)
- USB interface: USB type-C
- Communication mode: CDC (serial)
- Power: USB 5V 120mA, built-in 400mAh battery, maximum charging current 0.8A
- Number of calibration points: 101 (fixed)
- Number of scanning points: 101 (fixed)
- Display Tracking: 4, Marking: 4, Setting Save: 5
- PCB: 54mm x 85.5mm x 11mm/2.12" x 3.36" x 0.43" (without connectors, switches)
- Measuring S parameters, voltage standing wave ratio, phase, delay, Smith chart...
Package Included:
1 x NanoVNA host (with 500mAh battery)
1 x USB Type-C data cable
2 x 30mm SMA male to male RG174 RF cable
1 x SMA simple calibration kit
1 x SMA female to female connector
Shipping Policy
Payment Method
Returns Policy
Shipping Policy
Payment Method
Returns Policy
Copyright © 2017 DataCaciques
Store Categories
Store Categories
Other
Product View
Detail
Description:
* Simple and practical PC control software, you can export Touchstone (snp) files for various radio design and simulation software through PC software. The improved frequency algorithm can use the odd harmonic extension of si5351 to support the easurement frequency up to 900MHz. The metal shield is designed to reduce the external interference and improve the measurement accuracy. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic. The extended 300M-600MHz band provides better than 50dB of dynamics, and the 600M-900M band is better than 40dB of dynamics.
* This is a DIY product that provides perfect vector network measurement capabilities in the size of a credit card. It includes a 2.8-inch touch screen and 400mAh battery, which can be used offline for 2 hours. For longer measurement, please connect external power supply or contact me to make a larger battery version. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring..
Specification:
- Condition: 100% brand new high quality
- Product Name: Vector Network Analyzer
- Color: As picture shown
- Measurement frequency: 50KHz ~ 300MHz (50KHz -900MHz, enable extended firmware)
- RF output: -13dbm (maximum -9dbm)
- Frequency accuracy: <0.5ppm
- Measurement range: 70dB (50kHz-300MHz), 50dB (300M-600MHz), 40dB (600M-900MHz) enable extended firmware)
- Port SWR: < 1.1
- Display: 2.8 inch TFT (320 x240)
- USB interface: USB type-C
- Communication mode: CDC (serial)
- Power: USB 5V 120mA, built-in 400mAh battery, maximum charging current 0.8A
- Number of calibration points: 101 (fixed)
- Number of scanning points: 101 (fixed)
- Display Tracking: 4, Marking: 4, Setting Save: 5
- PCB: 54mm x 85.5mm x 11mm/2.12" x 3.36" x 0.43" (without connectors, switches)
- Measuring S parameters, voltage standing wave ratio, phase, delay, Smith chart...
Package Included:
1 x NanoVNA host (with 500mAh battery)
1 x USB Type-C data cable
2 x 30mm SMA male to male RG174 RF cable
1 x SMA simple calibration kit
1 x SMA female to female connector
On Mar-13-22 at 19:52:16 PDT, seller added the following information: