1 MHZ to 2400 MHZ with radio frequency meter 50 w power meter GY561

Description

1 MHZ to 2400 MHZ with radio frequency meter 50 w power meter GY561
Note: the product does not contain batteries!
GY561 frequency power meter adopts dot-matrix LCD screen, it is mainly used for measurement of radio transmitting equipment (e.g., handheld radio, vehicular interphone) of the output power and frequency. Due to the built-in load, make the table using the more convenient and quick, also greatly improve the reliability. Occasions, the only need to measure frequency can be an external antenna for non-contact measurement.
Features:
Display: LCM display
Frequency measurement: 1 MHZ - 2400 MHZ
Power measurement: 0.1 W - 50 W
The frequency resolution of 0.001 MHz (1 KHZ)
Resolution of 0.1 W
Input impedance: 50 Ω
Accuracy: 140-170/400-470 is better than 10%
Sampling time: 0.2 seconds
Working temperature: 0 to 40 degrees
Battery: three grain of 1.5 V AAA alkaline batteries (7)
Current consumption: about 100 ma
Automatic shutdown: about 80 seconds
Range: power measurement automatic conversion range, the measured signal exceeds 500MHz, power display "00.0W" can not test the power
When the measured signal is less than 1MHz, the frequency display will no longer be accurate
Calibration control: open the cover, visible two built-in regulator. Located in the lower left is the calibration frequency capacitance, the instrument reference, can be frequency calibration. Below is a power measurement baseline adjustment, factory has adjusted the (5.000 V) please don't adjust easily.
Packing list:
The host * 1 PCS
Connector (BNC male head turn SMA female head) * 1 PCS
Test line (SMA female head turn SMA female head) * 1 PCS
Antenna * PCS
Description * 1 PCS
Shipment quantity: 1pcs